- High gloss & excellent gloss retention
- Excellent colour fastness
- Excellent durability & fungus resistance
Good to see you!
Otherwise login by email.
Welcome to Dulux
Otherwise login by email.
Terms & Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
For more tailored inspiration, please fill in the 3 questions below.
If you have concerns about your privacy?
Read our Privacy Policy.
Delete Account
Dulux Stellar Gloss
-
Finish Low Sheen
-
Coverage 10 - 12m²/L
-
Drying Time Single coat at standard thickness: 30 to 40 microns.
Touch Dry:1 hour under normal conditions.
Recoat:3 hours under normal conditions. -
Coats 2
-
Low VOC, low odour
-
Fast drying time
-
Non yellowing
-
Good application properties
-
Easier clean-up of painting tools
-
Conforms to Singapore Green label criteria
-
Water based
Product Description
Suitable for use on interior and exterior metal and wood surfaces, both new or previously painted. It has excellent adhesion, colour retention, good durability and is low odour compared to conventional solvent based gloss finish.
Application Description
Thinning is usually not necessary after thorough stirring. If required, dilute the paint up to 10% with water. Dilution above 20% will affect the performance of the paint.
Conventional Spray-Dilute the paint with 10%-20% of water.
Airless Spray-Ready for use
Health & Safety
Tips & Advice
-
1. Preparing the SurfacesSurfaces must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax etc.
All surfaces should be rubbed down using a suitable abrasive paper and then dusted off. Any scrapped area should be spot primed. Light sanding on surface would ensure better subsequent intercoat adhesion.
Wood surfaces should be sanded in the direction of the grain, using suitable abrasive paper and then dusted off. Remove mould. Treat the affected area with Dulux Fungicidal Wash (A980-19260) and let wood dry at least 24 hours before application of Dulux Stellar Gloss
Ferrous surfaces should be sanded or wire-brushed to remove mill scale and rust.
Remove the rust thoroughly and the area should be spot-primed.
For optimum performance, new galvanized and aluminium surfaces should be cleaned and degreased, then pre-treated with an appropriate pre-treatment primer to ensure good adhesion
NOTE: Ensure good ventilation during application and drying. -
2. CleaningClean all equipment with clean water immediately after used.
-
3. StoringKeep out of reach of children. Keep away from combustible material. Keep away from food, drinks and animal feed. Container must be in a secure, upright position and be tightly closed.
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
Add a new job
Add a new job
Edit a job
Delete job
Are you sure? All notes, photos and saved items will be deleted.
Save colour
Save to My Workspace
Save product
Dulux Stellar Gloss
Save job