Dulux Stellar Speed Undercoat

An acrylic copolymer based undercoat.

Size

1 L 5L

Quantity

Paint Calculator

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key information

Finish N/A
Coverage 13m²/L
Drying Time Single coat at standard thickness: 30 – 40 microns
Touch Dry:0.5-1 hour under normal conditions
Recoat:2-3 hours under normal conditions
Coats 1

Product Features

Exhibits stain sealing property
Alkali resistance

Product Description

Dulux Stellar Speed Undercoat is an acrylic copolymer based undercoat. Its revolutionized formulation enables it to be used as an undercoat as well as a stain sealer.

Dulux Stellar Speed Undercoat is recommended for Dulux Stellar High Gloss and Dulux Woodcare Satinwood. It is suitable for use on correctly prepared and primed interior and exterior metal and wood surfaces where high film build and smoothness are required. It provides a smooth base for subsequent topcoats.

Application Description

Brush or Roller -Thinning is usually not necessary after thorough stirring. If required, dilute up to 10% with white spirit. Dilution above 20% will affect the performance of the paint.
Conventional Spray-Dilute with 10%-20% of white spirit.
Airless Spray-Ready for use.

Health & Safety

Toxic to aquatic organisms, may cause long term adverse effects in the aquatic environment. Repeated exposure may cause skin dryness or cracking. Avoid contact with skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes of paint from skin, use soap and water or a recognized cleanser. If swallowed seek medical advice immediately and show this container or label. Keep away from food, drinks, animal feed and out of reach of children. Keep away from combustible material. Container must be stored in a cool and shaded place. It must be tightly closed in a secure, upright position. Work in a well-ventilated area and do not breathe in vapor or spray. A suitable mask should be worn during sanding. When applying paint, it is advisable to wear eye protection. In case of firm use foam, dry powder, AFFF, CO2 – never use water. In case of spillage, contain and collect spillage using sand or earth and do not empty into watercourses, drains or environment. Dispose of any paint waste in accordance with the appropriate Environmental Quality Regulations. Refer to Dulux Product Safety Data Sheet for further details.

Download Adobe Reader

Tips & Advice

1. Preparing the Surfaces

Surfaces must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax etc. All surfaces should be rubbed down using a suitable abrasive paper and then dusted off. Any scrapped area should be spot primed. Light sanding on surface would ensure better subsequent intercoat adhesion.
Wood surfaces should be sanded in the direction of the grain, using suitable abrasive paper and then dusted off. Remove mould. Treat the affected area with Dulux Fungicidal Wash (A980-19260) and let wood dry at least 24 hours before application of Dulux Stellar High Gloss or Dulux Woodcare Satinwood.
Ferrous surfaces should be sanded or wire-brushed to remove millscale and rust. Remove the rust thoroughly and the area should be spot-primed.
For optimum performance, new galvanized and aluminium surfaces should be cleaned and degreased, then pre-treated with an appropriate pre-treatment primer to ensure good adhesion

NOTE: Ensure good ventilation during application and drying.
2. Cleaning

Clean all equipment with white spirit immediately after use.
3. Storing

Keep away from food, drinks, animal feed and out of reach of children. Keep away from combustible material. Container must be stored in a cool and shaded place.

How much paint do I need?

Measure your dimensions

Do you know the area?

No Yes

Enter your measurements

Meters Centimeters

Paintable area

Width *

Height *

Area *

m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

Amount needed:

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator