Super Maxilite

Economical emulsion for interior masonry surfaces
White on White 30GY 88/014
Size
Paint Calculator
This product is currently out of stock, please visit a store or other online retailers.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Matt
  • Coverage Up to 10m²/L
  • Drying Time Recoat : Min 1 - 2 hours under normal conditions
    Touch Dry : 1 - 2 hour under normal conditions
  • Coats 2
Product Features
  • High Coverage
  • High Opacity
  • LOW ODOUR
  • MOULD RESISTANT
  • Easy to apply

Product Description

Super Maxilite is an economical emulsion that can be used on all interior masonry surfaces where a smooth, matt finish is desired. It is especially formulated for the painting contractors to deliver good performance at a cost-saving price through offering good coverage, good opacity and easy application. Now with anti-mould.

Health & Safety

Treatments such as sanding, burning off etc of paint films may generate hazardous dust and/or fumes. Wet sanding/ flatting should be used wherever possible. Work in well ventilated areas. Use suitable personal protection equipment. Wear eye/hand protection. Do not breathe vapour/ spray. Do not eat, drink or smoke when using this product. Use only in well-ventilated areas. Remove as much paints as possible from brushes and rollers before cleaning. Keep away from food, drinks and animal feed. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. Do not get in eyes, on skin, or on clothing. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin, wash immediately with soap and water or a proprietary skin cleanser. Call a POISON CENTER or doctor if you feel unwell. Do not use solvents or thinners. Do not empty into water course. Safety data sheet available for professional/user on request

Tips & Advice

  • 1. Preparing the Surfaces
    Before you use: REMOVE RESIDUE: Remove any loose paint or powdery residue by brushing/scraping with a stiff fiber brush under running water or a high pressure water jet. TREAT AFFECTED AREAS: Use Dulux Fungicidal Wash (A980-19260) to treat areas affected by mould, lichen, algae or moss. ENSURE DRY WALL: Make sure that your wall is dry before painting. Do not paint if the wall is saturated with dampness (Protimeter reading higher than 16%). Allow excess moisture to evaporate. CLEAN SURFACE: Make sure that the surface to be
    painted is clean, dry and free from any defects, dirt, grease or wax.
  • 2. Cleaning
    Clean all equipment with clean water immediately after used.
  • 3. Storing
    Keep out of reach of children. Keep away from combustible material. Keep away from food, drinks and animal feed. Observe the label precautions. Store in a cool, dry, well ventilated place away from sources of heat, ignition and direct sunlight. No smoking. Prevent unauthorised access. Containers which are opened should be properly resealed and kept upright to prevent leakage. Do not use or store any paint container by hanging on a hook.
Fetching the data, please wait...