Dulux Satinwood

Luxury satin finish
Blue Jay 70BG 28/169
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Semi-gloss
  • Coverage 12 m²/litre
  • Drying Time Drying time : 6-8 hours under normal conditions
    Recoat 2 : Min 8 hours under normal conditions
  • Coats 2
Product Features
  • Long-lasting protection
  • Great resistance to scratches and stains
  • Opaque colours available through tinting

Product Description

Dulux Woodcare Satinwood® gives all types of wood and metal surfaces a soft and smooth finish like egg-shells. It has a premium quality solvent based satin finish and provides good resistance to scratch and stain. It is quick drying and provides long lasting protection with beautiful opaque colours.

Health & Safety

Keep out of the reach of children, away from food, drinks and animal feed. Keep away from combustible material and sources of ignition – no smoking. Avoid contact with skin or eyes. Wear eye/hand protection. Do not breathe vapour/spray. Use only in well ventilated areas. Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet [sanding]/[flatting] should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. Remove as much paints as possible from brushes and rollers before cleaning. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. Do not use empty container for storing food. If swallowed seek medical advice immediately and show this container or label. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. In case of fire use foam, dry powder, AFFF or CO2 fire extinguisher- Never use water Avoid release to environment. Refer to special instructions/Safety data sheet. Do not empty into drains or water course. Dispose of used container in compliance with local regulation. Safety data sheet available for professional user on request.

Tips & Advice

  • 1. Preparing the Surfaces
    SURFACE PREPARATION: Make sure that the surface to be painted is clean, dry, free from any defects or poorly adhering material, dirt, grease or wax, etc.
    REMOVE RESIDUE: All surfaces should be rubbed down with suitable abrasive paper in the direction of the wood grain and dusted off.
    CLEAN SURFACE: Prime ferrous surfaces with Dulux Aura Metal Primer. For wood surfaces, apply one coat of Dulux Aura Speed Undercoat. Galvanised iron and aluminium surfaces to be
    primed with Dulux Galvprime to ensure good adhesion.
    NOTE: Always keep doors and windows fully open during application and drying.
  • 2. Cleaning
    Clean all equipment with white spirit immediately after use. In the event of an accident, contain and collect spillage using sand or earth.
  • 3. Storing
    Keep out of reach of children. Keep away from combustible material. Keep away from food, drinks and animal feed. Container must be in a secure, upright position and be tightly closed
Fetching the data, please wait...